Products

 

EMCS Mold Clean Sheet

 

1, Introduction

The use of a certain number of plastic mold can cause mold surface after a certain degree of contamination, if the continued use of plastic semiconductor materials will lead to decreased surface finish, seriously damaging the quality of the product's appearance.  EMCS way to remove tape residue on the mold in the dirt.

The company's latest R & D production of EMCS clear requirements applicable to a variety of different plastic molds, their dimensions and packing weight can be manufactured according to the user's requirements.  This product is superior effect of the Qing mode, all performance indicators have reached international advanced level.

2, Packing and storage

1. Packing: EMCP Clean mold powder first with a polyethylene bag sealed, and then placed in cardboard box, carton packing weight 10 kg.
2. Storage: (1) EMCP Storage temperature: maintained at 5℃ below; room temperature storage: Remove from the refrigerator within 21 days of unused when you back into the cold storage; (2) Effective Date: the date from the date of manufacture for 12 months, should be stored 5 ℃ or below.
3. Transport: transport should avoid moisture, heat, sun and rain.

3, Physical property

Item	Unit	EMCS
Appearance		White solid (rectangular flaky matter)
Odor		Odorless
Size(mm)		74×39×7
Specific gravity	g/cm3	0.95-1.05
Weight	KG/box	10

4, Mold-cleaning conditions

Type	Moulding temp.(°C)	Moulding pressure	Mould-pressing time (min)	Cleaning times
EMCS mold clean sheet	170-190	30-40	5-7	3-6

This product can be under the same conditions with the epoxy molding use, but in order to achieve better results, it should be noted in different types of devices using different filling conditions and temperature.